Skip to content
- · GuidesCheapest hours without a controller: the hub tells, Home Assistant decidesThe hub works out which 15-minute periods are cheap and publishes a window. What to do about it stays with your automation. How to read it on both routes.Tested on firmware v1.2.1
- · GuidesYour supplier's day and night prices, applied to every circuitEnter your time-of-use zones, per-kWh charges and VAT in RBgrid, and see what each circuit costs at the price of the zone its energy was used in.Tested on firmware v1.1.4
- · GuidesYour heat pump on its own line: what it costs, then automate in HAMeasure a heat pump on its own circuit, see what it costs at your day and night prices, then drive its setpoint from the hub's tariff zone in HA.Tested on firmware v1.1.4
- · FAQDoes RBgrid switch anything on or off?No. The hub measures and records, and has no outputs or relays. Acting on what it measures is your own system's job - Home Assistant, for example.Tested on firmware v1.1.4
· GuidesA power meter for Home Assistant, from flashing to the Energy dashboardFlash RBgrid on an ESP32, clamp one circuit, and get power and energy into the Home Assistant Energy dashboard over MQTT discovery, with no templates.Tested on firmware v1.1.4
Feed (Atom)